50+ years of expertise. 20,000+ customers served. Proven national system.
Foamjection helps homeowners across Texas fix sinking concrete without tearing it out or overpaying for replacement. Whether you’re dealing with uneven sidewalks, settled driveways, sunken patios, or interior concrete floors, our proven polyurethane concrete lifting process delivers fast, clean, long-lasting results.
As the nationwide leader in polyurethane concrete lifting—powered by HMI, Foamjection helps Texas homeowners with certified local professionals who use high-density foam injection to lift, level, and stabilize concrete the right way.
Texas’s climate and soil conditions make concrete settlement a common issue throughout the state—from urban areas to rural communities.
Common causes include:
Left untreated, sinking concrete often worsens over time—creating trip hazards, drainage problems, and costly repairs.
Foamjection helps repair and stabilize a wide range of concrete surfaces across Texas, including:
If your concrete is uneven, sunken, or creating a safety concern, our process offers a reliable concrete repair solution without replacement.
Foamjection uses advanced polyurethane foam injection to lift and stabilize settled concrete with precision.
This process—often referred to as polyjacking or slab lifting—allows certified professionals to:
Most surfaces are ready to use again almost immediately.
Concrete lifting and leveling services available in the cities listed below.
Texas concrete settlement is often tied to expansive clay soil, long dry periods, heavy rain, storm runoff, poor drainage, and sudden changes in ground moisture. In many parts of the state, the soil below concrete can shrink during drought, swell after storms, and shift enough to leave driveways, sidewalks, patios, porches, pool decks, garage floors, and commercial slabs without steady support.
Foamjection serves Texas homeowners and property owners in large metro areas, fast-growing suburbs, East Texas communities, rural towns, commercial districts, and managed properties where sinking concrete can create trip hazards, drainage problems, uneven slabs, and unsafe walking surfaces.
In North Texas and the Dallas-Fort Worth area, homeowners in Garland, Irving, Bedford, Keller, Haltom City, Coppell, Trophy Club, and Argyle often deal with driveway settlement, sidewalk trip hazards, patio movement, front step issues, and garage floor slabs affected by clay soil movement and drainage problems.
In smaller North Texas communities, property owners in Decatur, Bridgeport, Justin, and Bowie may notice concrete dropping near garages, sidewalks, porches, shop slabs, entryways, and exterior walkways. Dry weather, heavy rain, poor compaction, and shifting soil can all create voids below the concrete.
In East Texas, Foamjection supports communities like Tyler, Longview, Van, Winnsboro, Troup, Overton, and Quitman. In these areas, moisture, clay soil, tree roots, drainage issues, and erosion can lead to settlement around driveways, pool decks, patios, sidewalks, steps, and commercial entry slabs.
Foamjection also helps Texas property owners in communities like Kountze, Splendora, and Ganado, where humidity, stormwater, sandy or mixed soils, and poor drainage can weaken the base below exterior concrete. Whether the issue is one uneven sidewalk panel, a sinking driveway, a low pool deck area, or several settled slabs around a business, the goal is to lift and stabilize the existing concrete whenever possible.
Concrete settlement in Texas often starts where soil moisture changes the most. A driveway may drop near the garage. A sidewalk panel may become uneven near the front entry. A patio may begin sloping toward the home. A pool deck may develop a low spot or raised edge. A garage floor may sound hollow or show a low area near a crack.
These signs are common around garage aprons, driveway approaches, front walkways, porch slabs, entry steps, patios, pool decks, sidewalks, shop floors, and concrete near downspouts or irrigation lines. In many Texas properties, long dry spells can pull moisture out of the soil. Then, when heavy rain returns, the soil can swell, soften, or wash away from under the slab.
Some Texas homeowners first notice the issue after a storm or drought. Water may pool near a low spot, drain toward the home, or run into a gap beside the slab. Once water reaches the weak area below the concrete, the slab may continue to sink, crack, or tilt.
If the concrete is still in usable condition, polyurethane concrete lifting can often raise and stabilize the existing slab without removing it. Foamjection’s foam injection process is designed to fill voids below the slab, lift the settled area, and help restore support underneath.
Texas weather can make small concrete problems worse over time. Heat, drought, heavy rain, humid weather, storm runoff, irrigation, and changing soil moisture can all affect the ground below a slab. When concrete has already started to sink, these conditions can cause more movement if the weak area below the slab is not repaired.
It may be time to request an estimate if you notice a driveway lip near the garage, uneven sidewalk panels, widening gaps, water pooling near a patio, porch steps pulling away, cracks near a low spot, hollow sounds under concrete, low pool deck areas, or garage floor sections that no longer feel properly supported.
Fixing settled concrete early can help reduce trip hazards, improve drainage, protect the existing slab, and avoid full replacement when the concrete is still a good candidate for lifting. For many Texas homeowners, foam injection is a clean and practical way to repair sinking concrete before the problem spreads.
Foamjection helps with residential, commercial, rural, and property management concrete lifting projects throughout Texas. Homeowners often call for driveway lifting, sidewalk leveling, patio repair, porch leveling, garage floor lifting, pool deck lifting, and concrete step repair.
Businesses, churches, schools, rental properties, warehouses, offices, restaurants, farm shops, municipal properties, HOAs, hotels, and managed buildings may also need concrete lifting when sidewalks, entryways, walkways, loading areas, shop floors, parking areas, pool decks, or exterior slabs become uneven.
Common Texas concrete lifting projects include:
Concrete replacement can be expensive, messy, and slow. It may still be needed when the slab is badly broken, crumbling, or structurally damaged. But when the concrete is still solid, lifting the existing slab can often solve the problem with less downtime.
Foamjection uses high-density polyurethane foam to lift and stabilize settled concrete. Small holes are drilled through the slab, foam is injected below the surface, and the material expands to fill empty spaces and raise the concrete. Once the lift is complete, the holes are patched and the work area is cleaned up.
For Texas properties, this process is especially useful when settlement is caused by expansive clay soil, drought-related shrinkage, heavy rain, storm runoff, poor drainage, irrigation washout, erosion, or voids below the slab. Instead of removing usable concrete, foam injection helps restore support underneath it.
Many surfaces can be used again quickly, which makes polyurethane concrete lifting a practical option for homes, businesses, sidewalks, patios, pool decks, driveways, garage floors, shop floors, entryways, and high-traffic areas where downtime matters.
If your concrete is sinking, uneven, cracked, or creating a trip hazard, Foamjection can help. Use the Texas city links on this page to find concrete lifting service near you, or request a free, no-pressure estimate today.
From Garland, Irving, and Keller to Tyler, Longview, Splendora, Ganado, and communities across the state, Foamjection helps Texas property owners fix sinking concrete without replacement when the slab is a good candidate for lifting.
Foamjection is not a franchise and not a lead reseller.
Our concrete lifting professionals across Texas meet strict national standards for:
Homeowners across Texas choose Foamjection because they want results without disruption.
✔ 50+ years of industry expertise
✔ 20,000+ customers served nationwide
✔ Certified local professionals
✔ Clean, controlled lifting process
✔ Save up to 70% compared to replacement
✔ Environmentally responsible materials
It’s a smarter way to fix concrete—and a better long-term investment.
Concrete often sinks in Texas because the soil under the slab changes with moisture. Long dry periods, heavy rain, poor drainage, clay soil, and erosion can all weaken the support under driveways, sidewalks, patios, garage floors, pool decks, and other concrete slabs.
When the soil shrinks, washes out, or settles, empty spaces can form under the concrete. Over time, the slab may crack, drop, tilt, or create a trip hazard.
Yes. Many parts of Texas have expansive clay soil. This type of soil can swell when it gets wet and shrink when it dries out. That constant movement can affect the concrete above it.
If your driveway, sidewalk, porch, steps, or patio has started to sink or separate, the issue may be connected to soil movement under the slab. Polyurethane concrete lifting can help fill voids and support the concrete without removing the existing slab.
Yes. Polyurethane concrete lifting works well for many Texas properties because the foam is lightweight, strong, and designed to fill voids under settled concrete. It does not add as much weight to the soil as heavier repair materials.
This can be helpful in areas where heat, drought, rain, and shifting soil have caused concrete to move. Good drainage is still important because water problems can continue to affect the soil over time.
Yes. During long dry periods, soil can shrink away from the bottom of the slab. This can leave gaps under concrete and cause sections to sink, crack, or become uneven.
Polyurethane foam can be injected under the slab to fill those empty spaces and lift the concrete back toward a safer position. This is often faster and less disruptive than tearing out and replacing the concrete.
Yes. Heavy rain can wash soil out from under concrete, especially when drainage is poor or water collects near the slab. This can happen around driveways, sidewalks, patios, pool decks, garage floors, and porch areas.
If water keeps running under the concrete, the slab may continue to lose support. Concrete lifting can help stabilize the slab, but fixing drainage issues can help protect the repair long term.
Yes. Sinking driveway panels are one of the most common concrete problems in Texas. Driveways may settle near the garage, street, expansion joints, or areas where water drains across the slab.
Polyurethane foam can often lift and support the settled section without full driveway replacement. This can improve appearance, reduce trip hazards, and help water move away from the home.
Yes. Uneven sidewalks and walkways can often be lifted with polyurethane foam. This is a good option when one section has dropped and created a raised edge or tripping point.
Sidewalk lifting can help make the area safer without removing long runs of concrete. It is also usually cleaner and faster than replacement.
Yes. Many sinking pool decks can be lifted with polyurethane foam if the concrete is still in good enough condition. Pool decks can settle because of poor compaction, water movement, soil erosion, or voids under the slab.
Concrete lifting can help reduce trip hazards around the pool and improve the look of the deck. It can also help correct low areas where water collects.
In many cases, yes. If the concrete is still solid but has settled, lifting is usually more affordable, faster, and cleaner than replacement.
Replacement may be the better option if the slab is badly broken, crumbling, or heavily damaged. But when the main issue is sinking or uneven concrete, polyurethane lifting can often save the existing slab.
Mudjacking uses a heavier cement-based material to raise concrete. Polyurethane concrete lifting uses lightweight expanding foam that fills voids, lifts the slab, and adds support under the concrete.
Polyurethane foam usually requires smaller injection holes and cures quickly. It is often a cleaner option for driveways, sidewalks, patios, steps, porches, pool decks, and garage floors.
Most concrete lifting projects can be completed in just a few hours, depending on the size of the area and how much the slab has settled.
Many surfaces can be used again the same day. That makes polyurethane concrete lifting a convenient option for busy homes, driveways, sidewalks, walkways, patios, and pool areas.
Your concrete may be a good candidate for lifting if the slab is mostly intact but has sunk, tilted, separated, or created a trip hazard. Common signs include uneven driveway panels, raised sidewalk edges, sunken patios, leaning steps, and low pool deck sections.
The best way to know is to request a quote. A concrete lifting specialist can review the slab, check the surrounding soil and drainage, and explain whether lifting or replacement makes more sense.
If you’re dealing with sinking or uneven concrete anywhere in Texas, replacement isn’t your only option.
Our trusted local experts use advanced polyurethane concrete lifting to restore and stabilize concrete faster, cleaner, and for less.
Foamjection is the nationwide leader in polyurethane concrete lifting—powered by HMI. Backed by 50+ years of expertise, 20,000+ customers served, and a proven national system, we help homeowners across the U.S. fix sinking concrete using advanced foam injection for long-term stabilization. From uneven walkways and driveways to patios and garage floors, our process delivers reliable concrete repair while helping homeowners save up to 70% compared to replacement.
Looking for a fast, affordable alternative to tearing out concrete?
